4
B-7) Car Finder
a>
Press button (3) once while the system is armed or disarmed, the hazard lights will flash for
30 seconds.
b>
Press either button (1), (2) or (3) while the system is in this mode. Siren will chirp once and
the hazard lights flash once. The system will be armed if it was disarmed before.
B-8) Mute Arm Mode
With the alarm disarmed, Press button (1) and (2) simultaneously, the hazard lights will flash
once, then press button (1) once again within a second.
To protect your vehicle, the system will emit a different alert depending on why the alarm was
activated.
a>
Warn away sensor triggered: siren will chirp three times
b>
Second-Stage Shock Sensor triggered: The hazard lights will flash, but siren will not sound.
The lights will be off after flashing one cycle and the system will remain in the mute arm mode.
c>
Ignition Trigger (when ignition is on): The hazard lights will flash and siren sound. Lights
and siren will not stop flashing and sounding until the ignition is turned off.
d>
Door opened and then closed: The hazard lights will flash and siren sound for one
siren-sounding cycle and the system will remain in the mute arm mode.
e>
Door opened and not closed: The hazard lights and siren will be on for three cycles, and
door sensors will be bypassed until doors are closed properly, the system will remain in the
mute arm mode.
f>
Bonnet opened and closed: The hazard lights will flash but the siren will not sound. Lights
will stop flashing after one siren-sounding cycle and the system will remain in the mute arm
mode.
g>
Bonnet opened and not closed: The hazard lights will flash for the three cycles, siren will not
sound, and bonnet switch will be bypassed until it is closed properly, the system will remain in
the mute arm mode.
h>
When the alarm is triggered, press button (1) once, lights will stop flashing. Press button
(1) once again, the siren will chirp 4 times, lights flash 4 times, doors unlock, immobiliser turn
off, LED off or flashes rapidly, and the system will leave mute arm mode.
B-9) Remote Valet Mode
This mode is a convenient feature to use when you hand the remote transmitter to third person
for valet parking or vehicle service.
With the system disarmed, switch the ignition on and press button (1) and (2) once
simultaneously, the lights will flash once. Then press button (1) and (2) once again
simultaneously within 2 seconds, the siren will chirp once and the system will enter valet mode.
In this mode, drivers can control only door lock/unlock.
To exit the remote valet mode, switch the ignition on and press button (1) and (2) once
simultaneously, lights will flash once. Then press button (1) and (2) once again
simultaneously within 2 seconds, the siren will chirp twice and then the system will leave valet
mode.
B-10) Emergency Override Mode
In the event of an emergency such as losing the remote control transmitters, you can override
the full security system.
a>
Open the door with your car key and the alarm will be triggered.
b>
Switch the ignition on/off 4 times.
