Falcon Nexus 110 Dual Fuel Скачать руководство пользователя страница 11

7

A

B

C

D

E

F

2.  Cooker Overview

The 110 dual fuel cooker 

(Fig. 2.1)

 has the following features:

A. 

4 hotplate burners, a Wok Burner and a Ceramic 

Multizone hotplate

B. 

Control Panel

C. 

Glide-out Grill™ with 4 position Trivet

D. 

Multifunction Oven

E. 

Fan Oven

F. 

Bread Proving/Storage Drawer

Hotplate Burners

The labels by each of the control knobs indicates which area 

that knob controls.
Each burner has a Flame Supervision Device (FSD) that 

prevents the flow of gas if the flame goes out.

When a hotplate control knob is pressed in, sparks will be 

made at every burner – this is normal. Do not attempt to 

disassemble or clean around any burner while another 

burner is on, otherwise an electric shock could result.

To light a burner, push in and turn the associated control 

knob to the high position as indicated by the large flame 

symbol (

H

), 

(Fig. 2.2)

The igniter should spark and light the gas. Continue to press 

in the knob to let the gas through to the burner for about ten 

seconds.

Fig. 2.1 

Fig. 2.2 

Содержание Nexus 110 Dual Fuel





















































Отзывы: