Falcon Hi-LITE 110, Руководство пользователя и инструкции по установке

Страница: 19 / 40

15
Ceramic Warming Zone
Daily Care
First of all, be sure that the heat indicator light is off and that
the warming zone surface is cool.
Apply a small dab of ceramic cleaning cream in the centre
of the area to be cleaned. Dampen a clean paper towel and
work the cream onto the surface. As a final step, wipe the
surface with a clean, dry paper towel.
Cleaning Spills
Turn off the unit and wipe the area surrounding the warming
zone with a clean paper towel. If a spill (other than a sugary
substance) is on the warming zone, do not clean until the
warming zone has completely cooled down, and then follow
the instructions below, ‘Cleaning Burned-on Spills’ .
If you accidentally melt anything on the surface or if you spill
foods with a high sugar content (preserves, tomato sauce,
fruit juice, etc), remove the spill IMMEDIATELY with a razor
scraper, while the unit is still hot.
IMPORTANT:
Use an oven glove to protect your hand from
potential burns.
Scrape the major spill or melted material from the warming
zone and push into a cold area. Then, turn the unit ‘OFF’ and
allow to cool before cleaning further. After the surface cools
down and the heat indicator lights go off, follow the ‘Daily
Care’ procedure outlined above.
Cleaning Burned-on Spills
Make sure that the heat indicator lights are off and that
the warming zone is cool. Remove the excess burned-on
substance with a single-edged razor scraper. Hold the scraper
at an angle of about 30° to the surface and then scrape off the
burned-on matter
(Fig.5-5)
.
Once you have removed as much as possible with the scraper,
follow the ‘Daily Care’ procedure outlined above.
To Remove Metal Rub-off
Sliding pans on the warming zone – especially aluminium or
copper pans – can leave marks on the ceramic surface. These
marks often appear like scratches, but can easily be removed
(see ‘Cleaning Spills’ ). If the rub-off marks are especially
stubborn, use a cleaning cream together with the razor.
The Griddle
Always clean the griddle after use. Allow it to cool completely
before removing. Immerse the griddle plate in hot soapy
water. Use a soft cloth or, for stubborn stains, a nylon washing
up brush.
Note: If the griddle is washed in a dishwasher then some
dishwasher residue may appear on the back. This is normal
and will not affect the performance of your griddle.
Fig.5-5