Start Your Appliance
Your appliance will start upon initial plug-in. The LED will
flash amber upon initial plug-in due to your unit being
powered-on at the factory to verify performance and then
powered-off. The
Sentry System
™ refrigeration monitor
senses a power outage has occurred and relays this infor-
mation to you when you initially power-up your appliance.
This is normal and pressing the “ON/OFF” button will reset
this alarm function.
If your appliance’s control has been shut off (i.e., unit
plugged in, interior lights operate, display blank), unit must
be turned on. To turn on your appliance, push and hold
for five (5) seconds, the “ON/OFF” button located on the
display panel (see Figure 2).
Once loaded with wine bottles, allow at least 48 hours for
the unit to stabilize before making any adjustments to the
initial setting.
Set Your Temperature Mode
This product can display either Fahrenheit or Celsius. To
do so, press the “
°
F/C” button on the display panel.
Set the Controls
The available temperature range of the unit is from 4 to
18 degrees C. The temperature set point is initially set in
the factory at thirteen (13) degrees C. The temperature set
point can be lowered or raised by first pushing the “SET”
button on the display pad. A “SET” icon will be displayed.
Pushing either the “WARMER” or “COLDER” buttons lo-
cated on the display pad will raise or lower the set temper-
ature by one (1) degree C or F (depending on your setting).
As with any refrigeration product, there is a slight tempera-
ture variance at different locations within the cabinet.
Adjustable Temperature Control
The temperature control is fully adjustable from the low
single digits to the high teens. The range allows flexibility
of temperature preferences.
Interior Light and Switch
The interior light makes it easy to view your wine labels
and enhances the display of your collection. The light will
always come on when the door is opened.
Warning Alarms
Your wine storage unit has been fitted with a
Sentry
System
™ refrigeration monitor. This monitor will let you
know if your unit is not functioning properly for optimum
wine storage.
Door Ajar Alarm
If the door has been left open for over five (5) minutes, the
alarm will sound and the LED will flash green. This will
stop as soon as the door is closed.
High and Low Temperature
If your unit reaches temperatures outside normal operating
temperatures for your set point for more than one (1) hour,
an alarm will sound and the LED will flash red. This will
warn you that your wines have seen temperatures that may
not be conducive for long-term storage.
Power Failure
If your unit experiences a power failure, the LED will flash
amber until the alarm is reset.
Reset Alarms
Press the “ON/OFF” button for approximately one (1) sec-
ond. This will reset all audible and display alarms.
Sabbath Mode
Your wine storage unit is equipped with a Sabbath Mode
feature. By activating this mode, you will be disabling all
displays, audible alarms and lights.
To activate Sabbath Mode, press and hold the “SET” but-
ton while pressing the “
°
F/C” button four (4) times within
seven (7) seconds. To deactivate Sabbath Mode, repeat the
process. Sabbath Mode will automatically deactivate after
72 hours.
Figure 2
SENTRY SYSTEM
™ REFRIGERATION MONITOR
3
ON
OFF
13
C
Set
Warmer
Colder
°F/C
Light
Sentry System
™
Power Failure - Flashing Amber
High/Low Temp - Red
Press ON/OFF - Reset
Alarms OFF - Steady Amber
Содержание FWS38DX
Страница 11: ...NOTES 10...
