Falcon FN2-4.5K-2TXI, Инструкция по установке и эксплуатации

Страница: 9 / 45

Installation & User Manual Falcon Electric, Inc.
FN2 Series OM480051 Rev.: E
9
Introduction
Overview
The FN2 Series On-line UPS System provides the highest level of protection against severe
power fluctuations.
The FN2 Series UPS continually regenerates new, AC power in pure
sine wave for superior protection.
This user manual provides basic information about the Falcon FN2 Series Uninterruptible Power
Supply (UPS). FN2 models are available in nominal power ratings of 4500, 6000, 8000 and
10000 volt-amperes (VA).
This manual also provides complete unit installation, safety considerations, important features,
as well as detailed operation and configuration of this device.
UPS Features

True on-line architecture continuously supplies your critical device with stable, regulated,
transient-free, pure sine wave AC power.

Precision Output Voltage & Frequency

Unity Power Factor (VA = W)

Parallel / N+1 Operation

Superior Brownout, Surge & Transient Protection

20 kHz PWM sine wave topology yields excellent overall performance.

The fully digitalized control circuitry built into the UPS allows upgrading the functionality
of the UPS as well as reaching a high level of protection of the UPS. Powerful
communication capability enhances remote control and monitoring.

Optional Constant Frequency Mode. (Fixed 50Hz or 60Hz output frequency)
*UPS De-rated to 75% capacity in Constant Frequency Mode

Hot-Swappable Battery Packs