Falcon FDW2002, Руководство пользователя

Страница: 12 / 16

KNNK
Cleaning and Special Maintenance
Filter Assembly
For best performance and results, the filter
assembly must be cleaned.
The filter efficiently removes food particles
from the wash water,allowing it to be recircu-
lated during the cycle.For this reason ,it is a
good idea to remove the larger food particles
trapped in the filter after each wash cycle by
rinsing the"A"semi-circular filter and cup un-
der running water.To remove the filter
assembly,pull on the cup handle in the up-
ward direction. The entire filter assembly
(made up of the "A" semicircular filter and
the"B" fine filter)should be cleaned at least
once a month.To clean the filter and the fine
filter,use a cleaning brush .Then,reassemble
the filter parts as shown in the figures below
and reinsert the entire aseembly in the
dishwasher,positioning in its seat and press-
ing downward.
The dishwasher must never be used without
the filters.Improper replacement of the filters
may reduce level of the appliance and dam-
age dishes and utensils.
Cleaning the Sprayer Arms
It may happen that food particle become en-
crusted on the sprayer arms and block the
hole. Check the sprayer arms periodically and
clean them when needed. (see "Close up view
[interior]",letters C-F ).
Cleaning the Water Inlet Filter
Periodically clean the water inlet filter(see fig-
ure 1/A) located on the outlet of the water sup-
ply tap.
After turning off the water tap, unscew the end
of the water supply hose,remove the filter and
clean it carefully under running water.Then,
return the filter to its place and tighten the water
supply hose back into position.
A
B