SECTION 4 - CLEANING and MAINTENANCE
Caution
Before cleaning is undertaken, switch off at the isolating (main) switch.
Allow the appliance to cool before cleaning. Clean with detergent/water solution taking care to rinse
and thoroughly dry.
Stubborn stains can be removed with nylon or scotch pads but take care when cleaning the stainless
steel surfaces. Never use harsh abrasives on stainless steel or vitreous enamelled finishes.
Do not attempt to clean this appliance with a jet of water or steam clean.
The oven base plate is removable as are the shelf support runners. To remove the runners, first lift
upwards to release the lower fixings then remove the bottom of the runner slightly inwards towards
the centre of the oven. Then drop the runner releasing the top locations. When refitting, ensure that
the plate is inserted the right way up.
Important Note
DO NOT ATTEMPT TO CLEAN THIS APPLIANCE WITH A JET OF
WATER OR STEAM CLEAN.
Do not use proprietary cleaners, especially those which may have a high caustic content, on the
vitreous enamelled surfaces of this unit (i.e. facia panel, drip tray, flue upstand and where applicable
the upper surfaces of doors). This is particularly important when the appliance is hot. Such cleaners
can cause serious damage or discoloration to the enamel finish and only a soap or detergent solution
should be used.