5
•
When the cursor is over the spot desired, that item can be activated by using the index finger
of the right hand to press the small white key just above the "H" key (Left Click). The
middle finger can be used on the small white key just above the "j" key (Right Click) to pull
down menus. Scroll up and down can be operated with the left hand index and middle
finger respectively on the small white keys just above the "D" and "F" keys. By holding
down both the Left and Right Click buttons, the thumb can be used to rotate an object (CAD
use) on the monitor. By holding down both the up and down scroll buttons, the thumb can
be used to zoom the object.
NOTE: The software program being used on the connected unit has to have this feature of
zooming or rotation for it to work with the falcon.
Right or Left Hand:
•
The activation keys can be set for either right or left hand operation. Normally, the right
two activation keys mimic the left-right click keys on a normal mouse. The left two
activation keys provide scroll up and down operation. The activation keys can be reversed
by pressing FN+R+L at the same time. Pressing FN+R+L again returns to normal.
•
A new right hand user of the
falcon™
may find it easier to use the Left Hand Keyboard
Operation setup so that the left hand can be used for Left and Right click while the right
hand thumb is used to move the cursor without worrying about the right hand finger
activation of selection keys.
