Falcon 960H, Руководство пользователя, Страница: 38 / 93

User’s Manual
30
You can turn individual cameras On or Off for pre-event recording. The image speed can be set from 1.00 to 30.00 ips
(25.00 ips PAL), image quality can be selectable from
Very High, High
,
Standard
and
Basic
, and image resolution
can be selectable from
Very High (D1)
,
High (Half D1)
and
Standard (CIF)
.
You can set the amount of time to record prior to the event by adjusting the
Dwell
. You can set the
Dwell
from 5 seconds
to 30 minutes. The longer the dwell set, the fewer maximum ips can be set.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the
time settings.
Event Setup
Motion
Figure 17: Event – Motion setup screen.
Your DVR has built-in video motion detection. Video motion detection can be turned On or Off for each camera.
Highlighting the box under the
Sensitivity
heading and pressing the button
allows you to adjust the DVR’s sensitivity to motion for Daytime and Nighttime
independently. There are five settings with
1
being the least sensitive and
5
being the most sensitive.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the box under the
Zone
heading, and press the button. The
Motion Zone
screen displays.
The
Motion Zone
screen is laid over the video for the
selected camera. You can set up motion zones by
selecting or clearing blocks.
NOTE: You can set up motion zones one block at
a time in groups of 16 individual block groups. A
block group is positioned within the image area
using the Up and Down arrow buttons, and individual
blocks within the block groups are selected or cleared
using the camera buttons.