Falcon 900S Induction, Руководство пользователя и инструкции по установке

Страница: 29 / 40

INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
25
ArtNo.062-0001 - 90 Prof+ FX - Removing the door
Hob check
Check each cooking zone in turn. Be sure to use pans of the
correct size and material.
Oven check
Turn on the oven and check that it starts to heat up. Check
that the oven lights are working. Turn off the oven.
Note:
The oven light bulb is not included in the guarantee.
Fitting
Removing the oven door
To remove the oven door, open the door fully. Swivel the
locking ‘U’ clips forward to the locking position (
Fig. 10.1
).
Grip the sides of the door, lift upwards and then slide the
door forwards (
Fig. 10.2
).
Refitting the oven door
To refit the door, slide the hinges back into their slots. Rotate
the locking ‘U’ clips back to fit onto the hinges.
Fitting the plinth
Remove the 3 screws for the plinth mounts along the front
bottom edge of the cooker ( Fig. 10.3 ). Fasten the plinth using
these screws (alternative colour screws can be found in the
loose parts pack).
Customer care
Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Fig. 10.1
Fig. 10.2
Fig. 10.3
10. Final checks and fittings