13
ArtNo.331-0005 Removing the grill rail
Fig.5-4
Fig.5-5
Fig.5-6
Fig.5-7
Stainless Steel Hotplate
Lift away pots or pans from the hotplate. Remove pan
supports from the spillage area and carefully place in a sink of
warm soapy water.
Wipe loose debris from main top.
Avoid using any abrasive cleaners including cream cleaners.
For best results use a liquid detergent cleaner.
Rinse with cold water and thoroughly dry with a clean, soft
cloth. Make sure all parts are dry before repositioning.
Glide-out Grill
nn
Before you remove any of the grill parts for cleaning,
make sure that they are cool, or use oven gloves.
Wash the grill pan and trivet washed in hot soapy water.
Alternatively, wash the grill pan in a dishwasher.
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the grid by using a nylon
brush.
Removing and Refitting the Grill Pan and
Support Frame
Pull the grill pan forwards
(Fig.5-4)
and lift it clear of the
support frame.
The support frame is held to the side rails by two clips on
each side
(Fig.5-5)
. For each side, support the side rail with
one hand and with the other hand lift the frame up and out
of the side clips
(Fig.5-6)
.
For safety, push the grill tray back into the grill chamber.
If you need to remove the side rails to allow cleaning of the
grill chamber, you can unhook them from the grill chamber
sides
(Fig.5-7)
and wipe the sides clean with a soft cloth and
mild detergent.
DO NOT put the side runners in a dishwasher.
Once you have finished, hook the side rails back onto the
sides of the chamber. To refit the frame, pull the side rails
forwards and for each side in turn, support the side rail while
pressing the frame down into the side clips.
Replace the grill pan.
