![background image](http://html1.mh-extra.com/html/falcon/4g-dtv/4g-dtv_user-manual_3253554006.webp)
Mounting requirements and selecting location
Find a suitable position on the roof of your vehicle. Please ensure that
you have selected the correct position suitable for hole into the interior
of the vehicle and that it is suitable for a cable entry and is clear of any
obstructions. Cabinets and cupboards are usually a preference to ensure
a tidy installation. Also ensure that if it will be mounted near any other
antennas on the roof, please try to ensure at least 30cm of clearance
around the antenna to avoid and interference issues.
Requirements:
Drill
Pilot Drill-bit 2 - 3mm (for the antenna base screws)
Hole Cutter / Arbor - 15 - 20mm ( For the central cable entry hole)
Sealant
Pencil
Masking Tape.
Prepare and drill hole
Once the position has been decided use the base to mark the 4 drill holes
and using a pencil draw around the diameter of the base in position.
Remove the base and mark the centre, masking the panel area around
the hole position to protect the paintwork. Drill the hole and then
increase the hole diameter to approx. 20mm.
Remove any swarf and clean around the hole thoroughly so the antenna
and the adhesive can bond correctly with the surface. If the surface area
is metal apply some petroleum jelly or paint around the hole to prevent
corrosion.
Содержание 4G DTV
