SECTION 4 - CLEANING and MAINTENANCE
Caution
Before cleaningis undertaken, switch off at the
isolating(main) switch.
Allow the appliance to cool before cleaning. Clean
with detergent/water solution taking care to rinse and
thoroughly dry.
Stubborn stains can be removed with nylon or scotch
pads but take care when cleaningthe stainless steel
surfaces. Never use harsh abrasives on stainless
steel or vitreous enamelled finishes.
Do not attempt to clean this appliance with a jet of
water or steam clean.
The oven base plate is removable as are the shelf
support runners. To remove the runners, first lift
upwards to release the lower fixings then remove the
bottom of the runner slightly inwards towards the
centre of the oven. Then drop the runner releasing
the top locations. When refittingensure to insert the
correct way up.
Important Note
Do not use proprietary cleaners, especially those
which may have a high caustic content, on the
vitreous enamelled surfaces of this unit (i.e. facia
panel, drip tray, flue upstand and where applicable
the upper surfaces of doors). This is particularly
important when the appliance is hot. Such cleaners
can cause serious damage or discoloration to the
enamel finish and only a soap or detergent solution
should be used.
