![background image](http://html1.mh-extra.com/html/falcon/1000-mercury-dual-fuel/1000-mercury-dual-fuel_users-manual-and-installation-instructions_3310510029.webp)
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
25
Gas Connection
This must be in accordance with the relevant standards.
The flexible hose (not supplied with the cooker) must be
in accordance with the relevant standards. Hoses may be
purchased at most builders’ merchants.
The gas supply needs to terminate with a down facing
bayonet.
The connector is located just below the hotplate level at the
rear of the cooker. If in doubt contact your supplier.
The rear cover boxes limit the position of the supply point.
Because the height of the cooker can be adjusted and
each connection is different, it is difficult to give precise
dimensions.
Although a 900 mm hose can be used, a 1250 mm hose
will allow slightly more flexibility in the positioning of the
bayonet and make moving the cooker easier.
The hose should be fitted so that both inlet and outlet
connections are vertical so that the hose hangs downwards
in a ‘U’ shape. Ideally the hose supply connection should be
within the shaded area ‘A’ shown
(Fig.7-23)
.
Screw connect the threaded end of the hose into the gas
inlet.
After completing the gas connection, ensure that the cooker
is gas sound with a pressure test.
Pressure Testing
The gas pressure can be measured at one of the centre
hotplate burner injectors (not the Wok burner).
The gas pressure can be measured at the injector of one of
the left-hand hotplate burners.
Lift off a burner head. Fit the pressure gauge to the injector.
Turn on and light one of the other hotplate burners.
Turn on the control knob for the burner with the pressure
gauge fitted to let gas through.
See the data badge for test pressures.
Turn off the burners and remove the pressure gauge.
n
n
Check the appliance is gas sound.
n
n
Check the operation of all the burners.
Current Operated Earth Leakage Breakers
The combined use of your cooker and other domestic
appliances may cause nuisance tripping, so we
recommend that the cooker is protected on an individual
RCD (Residual Current Device) or RCBO (Residual Current
Breaker with Overload).
IF IN DOUBT, PLEASE CONSULT A SUITABLY QUALIFIED
ELECTRICIAN.
All dimensions in millimetres
490
250
600
800
Gas inlet
block
A
Fig.7-23
Содержание 1000 Mercury Dual Fuel
Страница 1: ...Mercury 1000 Dual Fuel USER GUIDE INSTALLATION INSTRUCTIONS...
Страница 4: ...ii...
Страница 35: ...31...