5.
After the Velcro is placed at the bottom of the roll cage and along the fender line attach the front of the
door to place it where it needs to be. This helps to assure that all the remaining Velcro will be at the
correct locations to hang the door right. The photo below shows how the front of the door should look.
6.
Now move on to wrapping the adhesive Velcro around the roll cage at where each double-sided strip is
sewn to the edge as shown on the first page.
7.
To finish off the door attach the 20” adhesive Velc
ro strip down the rear portion of the door as shown
below. Then attach the door to the Velcro.
