Falcon Foodservice Equipment E1808 Скачать руководство пользователя страница 1

E1808, E1838, E1848 

DEEP FAT FRYERS

 

INSTALLATION and 
SERVICING INSTRUCTIONS

 

IMPORTANT

 

The installer must ensure that the installation of the appliance is in conformity with these instructions 
and National Regulations in force at the time of installation. Particular attention MUST be paid to:

 

 

BS7671 IEE Wiring Regulations 
Electricity at Work Regulations 
Health And Safety At Work Act 
Fire Precautions Act

 

 

This appliance has been CE-marked on the basis of compliance with the Low Voltage and EMC 
Directives for the voltages stated on the data plate.

 

 

 

WARNING

THIS APPLIANCE MUST BE EARTHED.

 

 

On completion of the installation, these instructions should be left with the Engineer-in-Charge for 
reference during servicing. Further to this, The Users Instructions should be handed over to the User, 
having had a demonstration of the operation and cleaning of the appliance.

 

 

IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE INSTALLING 
AND COMMISSIONING THIS  APPLIANCE. FAILURE TO COMPLY  WITH THE SPECIFIED 
PROCEDURES MAY RESULT IN DAMAGE OR THE NEED FOR A SERVICE CALL.

 

 

PREVENTATIVE MAINTENANCE CONTRACT

 

In order to obtain maximum performance from this unit we would recommend that a maintenance 
contract be arranged with 

SERVICELINE

. Visits may then be made at agreed intervals to carry out 

adjustments and repairs. A quotation will be given upon request to the contact numbers below.

 

 

WEEE Directive Registration No. WEE/DC0059TT/PRO  

At end of unit life, dispose of appliance and any replacement 
parts in a safe manner, via a licensed waste handler.

 

Units are designed to be dismantled easily and recycling of all 
material is encouraged whenever practicable.

 

 

Falcon Foodservice Equipment

 

HEAD OFFICE AND WORKS

 

Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland. 

                                              

      

 

SERVICELINE CONTACT

 

Phone: 01438 363 000  Fax: 01438 369 900    

 

 

 

T100696 Ref 5.

 

 

 

Содержание E1808










Отзывы: