Menu settings (only available when dash cam is not recording)
Short press the middle right button
to enter the video setting. Top left
“Video Icon” field is blue background; short press the button again to switch
to the setting setup Icon. The “Setup icon” is
blue.
In the menu settings, you can select to switch up and down in the setting sub-
item by short pressing the button
, and press the button
to
enter the setting sub-item, short press button , exit the setting screen
Time setting (only available when dash cam is not recording)
Short press button
2x to enter the setup setting state, scroll down to select
the date and time option by the button
, short button
to enter,
short button
, it can switch between year/month/day/hour/minute/second,
you can adjust the value by press
, press
to confirm the
modification; the machine automatically updates the local time after the GPS
access to the satellite successfully.
G-sensor function
When abnormal rapid deceleration or acceleration occurs, or an accident is detected,
the dash
camera automatically saves the video as a non-erasable file to micro SD card
G-sensor can be adjusted to High- Medium - Low
–
Off in the menu. Factory default Medium.
RECOMMENDATION TO SET TO LOW
File locking function
Press M while recording, the dash camera will save the current video as a non-erasable file.
Note: Do
not operate the dash camera in the car, to avoid any traffic accident.
Parking monitoring function
parking monitoring is turned on, when the vehicle is turned off, dash cam enters into the automatic
shutdown program, If the car receives a vibration from the external force, the dash cam will start
recording, automatic shutdown after recording 10-15 seconds; When the vibration is detected again,
the recording function will be started again.
the of parking guard recording is for 1080P 30 fps, and the file is automatically locked. Note: The
parking guard function must be in the case of automatic shutdown of dash cam.
the parking guard
function does not work after turning on/off manually.
Motion detection function
After turning the motion detection on, short press OK button to start the recording, it automatically
switches to motion detection standby state after the recording 10 seconds. there will be flashing
yellow dots on the upper left corner of the screen, when detecting moving objects. The motion
detection start time is 10-30 seconds. After motion detecting, the dash camera automatically enters
the motion detection standby state, the upper left corner of the screen switches to yellow flashing;
when the object is detected again to move, start the recording again!
GPS:
GPS antenna is included and will record vehicle speed and location on MAIN front cam video file only.
KM/H will be displayed on
4” LCD. To view location on map, use included GPS software or go to
website where you purchased dashcam and download GPS software for your laptop/computer.
