STEPPIII Hardware description
Version 1.0.0
6.5 Interface F (LED’s description)
The actual state of the STEPPIII can be displayed by three LED’s on the
interface D of the terminal. These programmable and accessible LEDs can
be interfaced to build-in components to show their state. References, to
customize the device configuration, are available in the STEPPIII software
manual
“STEPPIII_firmware_2.5.x_user_manual.pdf”
.
Figure 14:
View of the Red, Green, Blue LED indicators
6.6 Interface E (Mounting holes)
The STEPPIII compact terminal provides 4 holes for attaching it to the suitable
cradle. As a reference for mounting holes use figure 15 below in this section.
The cradle is available in the sales package. For detailed information about
mounting, please, refer to the related documents [
1.4
].
In order to avoid any damage during mounting of the terminal is required to
use (choose if the screws are damaged) properly the screws delivered with
STEPPIII. Fasteners are 22 x 6 mm screws plus suitable washers, or customized
screws.
Figure 15:
View of the mounting holes
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 31
