STEPPII-55/56-LT H
ARDWARE
DESCRIPTION
V
ERSION
1.01
information from at least 4 satellites and carries out the
necessary calculations to determine its current position.
AVL
The embedded GPS receiver into the STEPPII-55/56-LT
determines its current location, speed and heading. This
data can be stored or can be directly transmitted to a
control centre. The terminal reports its position to the
base
station
over GSM or GPRS (Internet) communications
network. Current position can also be displayed on digital
maps installed on PC/PDA.
SECURITY
Such as Telephone, Position, Speed/Course, Temperature,
Remote reading, Alarm, Movement, Fire, Gas, Water level
and many others.
SETTING ALARM INPUTS
For each input several telephone numbers (destination
numbers) can be configured. Beside the destination
number, alarm text as SMS with the desired GPS protocol
(max. 2 protocols) can be configured.
The alarm type could also be voice, and data connection.
REMOTE MONITORING
......
Normally the GPS antenna must be placed in a position where it can see the sky.. To
get a valid position, the STEPPII-55/56-LT should get information from at least 3
satellites.
The STEPPII-55/56-LT supports two different kinds ofsoftware (known as “
firmware
”).
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission
.
Page 25
