FALCOM MAMBOII, Руководство пользователя

Страница: 155 / 271

C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
- V
ERSION
1.0.0
<passkey>
Specifies the passkey for the Bluetooth headset. A passkey is a code that is used
to control access to a Bluetooth device (headset). However, the headset that
you want to connect to may not require a passkey, please refer to the manual
of the used headset. Entering of the passkey also affects the passkey that is
presently used for the Bluetooth data connection. That means, when you
reconnect the MAMBOII to your PC you have to enter this passkey for pairing
with the device instead of the prior one.
How to set/get device configuration:
Set configuration $PFAL,Cnf.Set,DEVICE.BT.AUDIOGW=32414124,0000
Get configuration
$PFAL,Cnf.Get,DEVICE.BT.AUDIOGW
3.2.10.18 DEVICE.PFAL.SEND.FORMAT
Parameter syntax DEVICE.PFAL.SEND.FORMAT=< start_txt>,<checksum>,<end_txt>,<end_msg>
This parameter changes or adapts the syntax of the messages that will be delivered
with
MSG.Send….
commands. It makes them easier to quickly identify the parts of
the message for further use. It defines the
start
and
end characters
for protocols
and
the entered text. Changing this parameter will affect the syntax of all messages
that are sent out from the MAMBOII via
Serial
,
CSD
,
TCP
and
SMS
.
<start_txt>
It defines the
start
characters (max.
10
chars) for each protocol that will be sent
out. By default, it is set to
$
-character. Keep in mind, the use of the
$
-sign inside
an SMS text might be misinterpreted and received as a another character. For
more information, refer to the
User’s Guide
of the receiving modem.
<checksum>
It defines the checksum. However, it can be set to:
Value Meaning
CKSUM
Adds a NMEA compatible checksum at the end of text
section (default). Note that, the checksum is computed
for text only and not for a possibly defined
< start_txt >
before. If protocols are specified within the
MSG.Send
command then all protocols will be sent in the format, for
example,
$GPRMC....*CS
including
„$“
and checksum
„*CS“
NOCKSUM
No checksum is added after user defined text. If protocols
are specified within the
MSG.Send
command then all
protocols will be sent in the format, for example,
GPRMC....
excluding
„$“
and checksum
„*CS“.
This format is
suited for SMS communication service as some modems,
expect the MAMBOII, could not receive correctly the
$
-
dollar sign.
<end_txt>
It defines the end characters (max.
10
chars). A CRLF will be added
automatically at the end of the defined
„end characters“.
<end_msg>
It defines the
end
characters to complete the message (max.
10
chars) (default
=
<end>
allowing syntax compatibility to the PFAL responses). The CRLF will be
added automatically at the end of the defined
„end message“
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 155 of 271