FALCOM MAMBOII, Руководство пользователя

Страница: 132 / 271

C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
- V
ERSION
1.0.0
3.2.7.4 “Info” command index
3.2.7.4.1 MSG.Info.ServerLogin – Gets login information that the device sends to
the server
Command syntax $PFAL,MSG.Info.ServerLogin
Examples
$PFAL,MSG.Info.ServerLogin
Responses
E.g.
$DeviceName=Mambo2_Fadil
$Software=MAMBOII_2.4.3_ALPHA_200807
$Hardware=MAMBOII-TELIT[GE864-QUAD]
$LastValidPosition=$GPRMC,114814.000,A,5040.3991,N,01058.8435,E,,,11
0907,,
$IMEI=357023006112211
$LocalIP=10.129.24.95
$CmdVersion=2
$SUCCESS
Command description
This command retrieves the login data that the device will send to the remote
server (e.g FALCOM application server) to identify itself. The login TCP packet
consists of the
DeviceName
,
Hardware
,
Firmware version
,
Revison
,
IMEI
and
Local
IP
.
Parameter description
None.
3.2.7.4.2 MSG.Info.Protocol, <protocols >,<” text ”> - Transmits protocol reports to
the sender
Command syntax
$PFAL,MSG.Info.Protocol, < protocols >,< ”text” >
$PFAL,MSG.Info.Protocol,
< protocols >,< ”text
& (entry) ”>
Examples
$PFAL,MSG.Info.Protocol,8,”MAMBOII outputs its GSP positions”
Responses
E.g.
MAMBOII outputs its GSP positions
$GPRMC,120633.000,V,5040.3991,N,01058.8435,E,,,110907,,
$SUCCESS
Command description
This command transmits the specified text and GPS protocols back to the sender.
Depending on the used connection type the selected protocol(s) and user
specified text could be transmitted via serial interface, CSD, SMS or TCP to the
command sender. Please note that, the user specified text is firstly received
followed by the selected protocols.
Parameter Description
<protocols>
It specifies the kind of protocols to be transmitted back to the command sender.
Supported protocols are listed in chapter
6.3 page 245.
<”text”>
It specifies the text to be added to the selected protocols and transmitted back
to the command sender. The text is limited to
200
characters and it must be
wrapped in quotation marks (" ") even if there is no text specified. The text is
automatically terminated by <CR><LF>.
If you want to output also any system state (dynamic
entry
) when the command
is executed, the syntax of the
<”text ” >
can be changed to:
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 132 of 271