MAMBO2-B6 H
ARDWARE
M
ANUAL
V
ERSION
1.0.4
To open the Device Manager under Win 2000 or XP, just right click on My Computer icon and
go to
Properties
->
Hardware tab
- > click on
Device Manager
button and expand
Ports
item.
After the USB driver is installed, you can disconnect and reconnect the MAMBO2-B6 device without
reinstalling USB driver.
Note: Whenever you want to reset your MAMBO2-B6, first unplug it from the USB port of your PC
and when the device boots up completely plug it again on the PC's USB port.
After completing all the steps listed above you can start configuring your MAMBO2 device. For more
details how to configure and test your MAMBO2-B6, refer to the manual “
MAMBO2-
B6_PFALConfigurationReferenceGuide.p
df
”. The principle of MAMBO2-B6 operation is explained in Chapter
5.3.4
. To get started with MAMBO2-B6-EVALKIT, please refer to the manual
“MAMBO2-
B6_EvalKitGettingStarted.pdf”
.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 26 of 28
