manualshive.com logo in svg

FALCOM A2 Series, Руководство пользователя и справочник команд

Поделиться
Скачать
FALCOM A2 Series Скачать руководство пользователя страница 61

FALCOM A2

A2MAN.DOC

08 MARCH 1999

 This confidential document is the property of Funkanlagen Leipoldt OHG and may not be copied or circulated without permission.

Page 60

4.5.4

 

SIM card issues

Inserting a SIM Card

This SIM card fits into the SIM card holder under the
plastic cover at the  and close it by pushing the metal flap
to "CLOSE".

Using the PIN Code PIN (Personal Identification Number)

The PIN code is a secret code to protect and control access
to your personal SIM card. If the PIN code feature is
enabled, you will be prompted to enter it after you turn on
the phone. To enter your PIN code, use the number keys to
enter the PIN digits, then press "#" key. If the PIN code is
not entered correctly after three attempts, further PIN
entry attempts will be blocked and the message "Unblck
PIN" will be displayed. This feature protects your phone
from unauthorised tampering. Enter the Personal
Unblocking Key (see Personal Unblocking Key below),
then enter your PIN Code to access your SIM. If you have
more questions concerning PIN or SIM, contact the
network operator who supplied the SIM.

PIN2

The second Personal Identification Number, PIN2 is used

to control access to specific functions provided on your
SIM. When you attempt to access these functions, you
may be prompted to enter your PIN2 code. The method of
entering PIN2 is the same as for your PIN code: Use the
number keys to enter the PIN2 digits, then press the "#"
key.

PUK (Personal Unblocking Key)

The PUK code is a secret code related to your SIM card. If
the message "Unblck PIN" displays on the LCD, then you
,must enter the PUK before you access the SIM again with
a PIN code. Enter the PUK and your new PIN code as
follows.

**05*PUK*New PIN#

If you enter the wrong PUK ten times, your SIM card will
be disabled permanently. You will have to contact you
network operator because you can’t change your PUK by
yourself.

4.5.5

 

Switching ON/OFF the Phone

Switching On

To turn on the phone, plug in the power supply and press
Soft On for three seconds. If there is no SIM, the phone

Содержание A2 Series


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды