Falco HEE92-900MM, Инструкция по использованию и уходу, Страница: 9 / 11

9
Fig.9
• FUNCTION KEYS :
( Fig.9)
A= Filtering system / Set clock
B= Delay Timer
C= Speed S1/ “-” adjust / off
D= Digital display
E= Speed S1/ “+” adjust / off
F= Alarm
G= Light
When the Key A is flashing, at the same time “
”is flashing on the
digital display, it reminds the user to clean the filters. After the filter has
been cleaned assemble back. Press key A till the light is off and the unit is
back to setting function again.
When pressing key A for 3 seconds, the clock “ ”on the digital
display will flash, press key A to switch the mode function to set hours
and minutes, and then press key C or E to set the correct time. The
Clock’s system is 24 hours.
When the motor is on, press key B the light will on. At the same time
“
” will flash on the digital display
，
and to press key B to
switch the function mode to set hours and minutes. To set the time to
automatically shut off, key C or E has to be pressed. Press key B for 3
seconds to stop the delay timer.
Press key C or E, to start the first speed, and it shows “ ” on the digital
display
，
and to press key C once again to turn off. To run the 2
nd
, 3
rd
and “Turbo” speed, press Key E. If the “Turbo”speed is on, press key
E once again to turn off; and by pressing key C the speed can be
adjusted down from 3
rd
, 2
nd
and 1
st
.
Press key F light will flash, and it shows“ ” flashing on the
digital display
，
to press key F again to switch to set hours and minutes
mode. To set the alarm press key C or E. To stop the alarm, press the key
F. And to cancel the alarm set, press the key F for 3 seconds.
Press key G light will on, and symbol “ ” display on the digital screen,
and press key G again to turn off the light.
MODEL:
HES30(C-900MM) HES30(S-900MM)
HES30(S-600MM) HES33(C-900MM)