If not provided, connect a plug for the electrical load indicated on the
description label. Where a plug is provided, the cooker hood must be installed
in order that the plug is easily accessible.
An omnipolar switch with a minimum aperture of 3mm between contacts, in
line with the electrical load and local standards, must be placed between the
appliance and the network in the case of direct connection to the electrical
network.
• The minimum distance between the support surfaces of the cooking pots on
the cooker top and the lowest part of the cooker hood must be at least 65 cm.
If a connection tube composed of two parts is used, the upper part must be
placed outside the lower part.
Do not connect the cooker hood exhaust to the same conductor used to
circulate hot air or for evacuating fumes from other appliances generated by
other than an electrical source.
Before proceeding with the assembly operations, remove the anti-grease
filter(s) (Fig.5) so that the unit is easier to handle.
In the case of assembly of the appliance in the suction version prepare the hole
for evacuation of the air.
• FIXING TO THE WALL
Drill the holes
A
respecting the distances indicated (Fig.2).
Fix the appliance to the wall and align it in horizontal position to the wall
units. When the appliance has been adjusted, definitely fix the hood using the
screws
A
.
For the various installations use screws and screw anchors suited to the type of
wall (e.g. reinforced concrete, plasterboard, etc.). If the screws and screw
anchors are provided with the product check that they are suitable for the type
of wall on which the hood is to be fixed.
• FIXING THE DECORATIVE TELESCOPIC FLUE
Arrange the electrical power supply within the dimensions of the decorative
flue. If your appliance is to be installed in the ducting version or in the version
with external motor, prepare the air exhaust opening. Adjust the width of the
support bracket of the upper flue (Fig.3). Then fix it to the ceiling using the
screws
A
(Fig.2) in such a way that it is in line with your hood and respecting
the distance from the ceiling indicated in Fig.2. Connect the flange
C
to the air
exhaust hole using a connection pipe (Fig.4).
Содержание HEE22-1100MM
