fakro ZWK10 страница 6 Скачать руководство пользователя

Страница: 6 / 16

ZWK 10

In/Ex

Attach holder to the wall in a location convenient for the user.

Put batteries in the controller

Prepare device which is to be operated (see Product User Manual)

Screw holder firmly to the wall with the use

of anchor pins.

Put the ZWK controller onto the holder

Make sure that the device is appropriately installed and plugged in to power supply.

Make sure that you have physical access to programming button and device manual

operating button.

Make sure that the device operates appropriately by pressing manual operating button.

Make sure that the network status LED on the device which is to be added to controller

lights up. If the network status LED does not emit light it means that the device is not

plugged in to power supply (manual operation does not work) or it has already been

assigned to the same or other controller.

Note! In devices powered by photovoltaic panel (AMZ Z-Wave Solar awning blind, ARZ Z-

Wave Solar roller shutter) the network status LED should light up for 5 sec. after pressing P

button what means readiness to assign device to the network.

Preparing controller for programming

Содержание ZWK10

















Результаты поиска

Содержание ZWK10

Отзывы:

Похожие инструкции для ZWK10

Бренды по названию

Популярные бренды

fakro ZWK10, Руководство пользователя

Результаты поиска

Содержание ZWK10

Отзывы:

Похожие инструкции для ZWK10

Бренды по названию

Популярные бренды