ULTRACARE
GB
17
Before using the hair clipper
The hair to be cut should be clean and dry or damp. Carefully comb the hair to remove
any knots. Place a towel around the neck to prevent any trimmed hairs failing down
inside the collar.
To prevent the electric shock, never use the appliance near water/liquids when it is
connected to the mains supply.
For Long Life of Battery
• Do not recharge the groomer between sessions. Wait until the batteries are
exhausted before recharging.
• Discharge the batteries completely twice a year (switch on and run until the groomer
stops).
• If the groomer hasn’t been used for a long period of time, discharge the batteries
completely, then fully charge them for 12 hours before use.
• Never charge the groomer for more than 24 hours.
• Do not use the groomer while connected to the Charger.
• Never recharge the battery in a temperature below 10°C.
• Avoid recharging the battery in direct sunlight or near a radiating heat source.
Operating
The appliance is designed for both wet and dry hair.
Changing attachments (A) :
There are 6 different grooming attachments. A different grooming attachment is fitted to
the groomer for each type of grooming.
1. Hold the body of the groomer and twist the attachment in the direction shown until
the lock marks line up as shown.
2. Lift the attachment off the body of the groomer.
3. Place the new attachment on the head of the groomer body.
4. Twist the attachment until the lock marks line up as shown. The attachment is now
ready for use.
(B)
Switching on:
Press the switch lock. While holding the switch lock, slide the switch up (towards the
top of the appliance) to switch on.
Switching off:
Slide the switch down to switch off the appliance.
