Fakir TASTEA, Руководство пользователя

Страница: 26 / 68

26
EN
Operation
Energy saving: This device is designed for brewing tea and it is very practical. When in
use, boils the water in a short time and passes to keep warm mode automatically through
reducing the power consumption by 90%. In this mode, boils the water in the minimum
level, so avoids unnecessary steam and also keep the tea in the teapot hot and provides
energy saving. Keep warm button is turned on to boil in the shortest time when water is
added into the kettle.
When the water is boiled, heating is again reduces to the minimum level automatically and
keeps the water warm. Briefly, after water is added into the kettle, the on/off button and
keep warm button are turned on and the on/off button is turned off when tea service is over.
The process to keep the water and teapot warm and for energy saving during this period is
automatically performed by the device. Without water in the kettle or
when the water is under the minimum level, do not turn the on/off button on. On/off button
must be turned off when there is no water. In terms of safety, the device is protected with
two thermostats and these fuses are activated when there is no water and restarts when
water is added.
Preparing Tea
Open the power cord and plug wrapped around the power transmission base of your device
and plug into a grounded socket. According to the amount of the tea you wish to brew, fill
the kettle with water within maximum and minimum levels . Locate the kettle on the power
transmission base. Open the lid of the teapot and remove the tea strainer.
Put adequate amount of tea on the strainer and locate it into the teapot after washing it
slightly with cold water. Turn the on/off button and keep warm button to on position. The red
indicator led will flash and the water will start to get warmer. According to the amount of
water added, the water will start to boil within 3-8 minutes and the keep warm button will
automatically pass to on position and reduce the heating power to keep the water in boiling
condition in the minimum level and to provide energy saving. The indicator led will be green.
Brew the tea with boiling water and place the teapot on the kettle. When needed, add water
into the kettle. If you add water, bring the keep warm button to on position again.
Kettle
You can use it for heating and boiling water when needed in the kitchen. In order to do this,
fill the kettle with water like in tea preparation process, locate it on the power transmission
base and through covering the kettle with the teapot, bring the keep warm button and on/off
button to on position. Like explained in tea preparation section, the device boils the water in
a short time and passes to keep warm mode. If you add water, bring the keep warm button
to on position again.