Fakir SkyJET, Инструкция по эксплуатации, Страница: 30 / 78

SkyJET GB
30
NOTE!
The iron will not operate without the steam selector
fitted.
IMPORTANT!
Only turn the steam selector knob to “SELF CLEAN”
position when you want to activate the self-cleaning
system. Do not turn the steam selector knob to “SELF
CLEAN” position when ironing.
Cleaning the removable steam valve
• In addition to the self-cleaning operation, we advise cleaning
the steam valve once a month (e.g. whenever steam
development is insufficient). The steam valve is located at the
lower end of the steam selector .
• Before removing and cleaning the steam valve unplug the iron
and empty the water tank.
• Carefully pull out the steam selector . Do not touch the steam
valve at its lower end (Figure 14).
• Immerse the steam valve in vinegar (not vinegar essence) for
4 hours until the lime becomes soft. Using a non-metallic
brush to remove remaining residues, then rinse under running
water. Do not use sharp objects for cleaning the steam
valve(Figure 15).
• Replace the steam selector by pressing the steam selector
down (Figure16) and turn the knob to position ‘ ’
(Figure 17).
• Insert the plug into the wall socket.
• Set the temperature dial to position LINEN.
• Let the iron heat up again.
• The remainder of the water inside the steam chamber will now
vaporize.
• Unplug from power supply and allow soleplate to cool and
wipe it clean with a soft damp cloth.
Fig. 14
Fig. 15
Fig. 16
Fig. 17