Fakir SHAYE, Руководство пользователя

Страница: 18 / 52

18
SHAYE GB
General Information Before Use
• The Tea Machine is a very practical appliance designed to brew tea using classical
method. Once turned on (2 & 3) , it quickly boils water and automatically takes the
‘keep warm’ position to reduce energy consumption by %90. In that position it boils
the water at minimum level both preventing excess boiling, ensuring that the tea in the
teapot is kept hot and saving energy. When water is added to the boiler, keep warm
switch (3) s turned on again to make the water boil. Once the water boils, heating
function goes automatically to the energy saving mode.
• Main switch must not be turned off when the boiler contains no water or when water is
below the minimum limit. For safety purposes, two thermostats protect the appliance.
When water is used up, the appliance stops and water is added the appliance stops
automatically.
• The Tea Machine, can also be used as a kettle. In that case, the provided lid can be
used to cover the boiler. With its function of to keep the water warm at the energy
saving position, the appliance supplies constantly hot for a long period of time before
it evaporates.
Using Your Tea Machine
Preparing tea:
Release necessary length of the power card from the cable storage unit (6) that is
hidden under the energy transmitting plate of your appliance and connect it to an
earthed socket. The unit may remain plugged even at turned off position when the
appliance is not used.
Fill the boiler with water between the maximum and minimum limits depending on the
amount of tea you want to brew. (1)
Place the boiler on the energy transmitting plate and plug it in.
Open the lid of teapot and take off the tea filter. Put a sufficient amount of tea leaves in
the filter, shortly pass it through cold water and place the filter in the teapot. (2)
Take the main switch in (I) position and the boiling switch in ( ) position. (3)
The red pilot light gets turn on and the water will start to heat up. Water gets boiled in
3-10 minutes depending on the amount of water than keep warm switch shifts to off ( )
position automatically to keep water boiling at minimum level energy saving.
At that time, the green pilot light on the handle turns on. (4)
Pour the boiled water on the tealeaves and replace the teapot (5) Add water into the
boiler, if required. If you do so, turn the keep warm switch on again. ( ).