43
EN
NOTE!
If the remote control doesn‘t respond, please check the batteries.
If you still can‘t operate the cleaner after charge, re-pair again:
Keep the cleaner in the standby mode (red light on), press the button, after
approx. 6 sec. and two beep sounds the red and green indicator will flash alter-
natly, then release the key. Long press
till you hear beep sound (distance
beetween machine and remote control should be less than 1 m).
Second method: In off mode (light off) long press till beep sound and red light
on, hold button and meanwhile long press till next beep sound.
Remarks:
If there‘s no beep sound during above operations, the pair-code operation is
failed.
WARNING!
Please turn off the power switch or disconnect the power plug first.
If do not use the cleaner for a long time please fully charge the battery first and store it in
a dry place.
ATTENTION!
Do not use any cleaning agents, abrasives or alcohol. These may damage the external
housing. Clean the device only with a dry or damp piece of cloth. Never clean the electric
parts with water.
NOTE!
Always make sure that all filters are inserted before using the vacuum cleaner.
Cleaning the pole pieces
Clean the pole pieces regularly with a dry cloth. Never
use oil.
