Fakir RIGO, Инструкция по эксплуатации

Страница: 8 / 12

8
2. In the winter, the cold air outside enters
the room and becomes warmer by the
higher temperature in the room. As a
result, the relative humidity decreases.
Want to keep the healthy environmental
humidity? We need to increase the mist
volume in the air. Humidifier can do
that for us.
3 . R e l a t i v e h u m i d i t y i n d i f f e r e n t
environments suitable for people:
Bedroom, sitting room:
45-64%RH
Patient’s room: 40-55RH
Room with computer, experiment
equipments: 45-60%RH
R o o m w i t h p i a n o :
4 0 - 6 0 % R H
Museum, exhibition hall, and library:
40-50%RH
B. Water filter:
1. The plastic part is mixed with NANO-
SILVER material to prohibit the
bacterial.
2. Ceramic balls can soften the hard
water.
3. Ceramic filter can eliminate the strange
smell in the water.
Working Principle: Ultrasonic Humidifier
use the ultrasonic high-frequency
oscillator to break up water into tiny
water particles with the diameter of
about 1-5um. The ventilation system
blows out this water into the dry air
where they evaporate to give the
required humidity. The clearly visible
smooth and even fog can be seen out
of the unit.
I N S T R U C T I O N S T O U S A G E :
1. Put the machine on a flat surface.
2. Fill the water into the water tank, and
then tighten the tank cover.
3. Put the water tank on the main body.
4. Check if the rated voltage meets the
input voltage, and plug in the socket.
5. Switch on the machine; the background
light of LCD will be on. The machine
begins to work.
6. Press the button “
MAX
” or “
MIN
”, you
may adjust the mist volume. On the
remote control, just press the button
“
MIST VOLUME ”.
7. Press the button “
OZONE
”, the ozone
generator works. On the LCD display,
it shows the shape of trees. Press
again to stop the function.
8. Constant humidity: Before you press
the button “ HUMIDITY ”, LCD display
shows the current humidity. You may
set the humidity arranged from 45%RH
to 90%RH. Press once, it will increase
by 5%RH. When it reaches 90%RH,
press again, it will back to 45%RH.
After you set the expected humidity,
the machine will keep the memory after
5 seconds. 5 seconds later, LCD
display shows the current humidity. If
the expected humidity is less than the
current humidity, the machine will be
in sleeping state. But if the expected
humidity is higher than the current
humidity, the humidify function will work.
9.
Timer setting:
There are 5 timer setting:
2,4,6,8,10 hours. Press the button
“
TIMER ”, LCD display shows the shape
of clock. The timer shows the rest
operation time and decrease by 2
hours, i.e., if set the timer at 10 hours,
LCD display shows 8 after two hours.
10.Once the water in the basin is too little
to keep the machine working, the
machine will automatically stop working.
LCD shows nothing. Refill the water,
and the machine will restart.
Correct Humidity Level:
• What exactly is relative humidity:
Relative humidity is the percentage of
the actual water vapor contains to the
saturated water vapor contains under
the same definite temperature and
space. We normally mark it with %RH,