Fakir PRETTY, Руководство по эксплуатации, Страница: 16 / 48

PRETTY GB
16
Setting suction power:
You can set the suction power of the appliance
for the floor to be cleaned using the suction
power setting button on the body.
Dust indicator:
The dust indicator shows the fill rate of the dust
bag. If the indicator shows all red, replace the
dust bag even if it is not totally full.
Operation:
Pull the plug on the back of the appliance and
plug into a socket.
Press the on-off button to run the appliance.
Turning of the cleaner and parking:
Turn off the appliance using the on-off button
and unplug it.
Hold the cord wrapping button to collect the
electrical cord into the appliance and release it
once the whole electrical cord is collected within
the appliance.
Vertical parking:
Fit the hook of the parquet/carpet brush on the
parking conduit under the appliance.
Horizontal parking:
Fit the hook of the parquet/carpet brush on the
parking conduit on the backside of the appliance.
Your divice has electronic power adjustment. You
can increase or decrease the vacuum power when
you would like. We advise you to keep the suction
power at midium/minimum level for carpet
cleaning, and at maximum level parquet and floor
cleaning.
Operation
1. Plug the suction hose adapter into the suction
hose receiver.
2. Push the handle into the upperend of the
telescopic tube.
3. Push the floor nozzle onto the lower end of the
telescopic tube.
4. Adjust the length of the telescopic tube. To do
this, pres the telescopic tubelock forwards. Then
pull the telescopic tube by the handle to the
desired length. To lock it, release the telescopic
tube lock while you pull.
5. Pull the cable till you see the red mark on the
cable.
6. Switch on the cylinder vacuum cleaner using the
on/off switch.
7. Adjust the carpet/hard floor switch depending on
the type of flooring:
• Hard floor laminate flooring, tiles, PVC flooring,
etc. (with brush)
• Carpet long and short pile carpets, runners, etc.
(without brush)
8. To vacuum, pull the cylinder vacuum cleaner
behind you like a sledge.
ATTENTION!
Be sure that all filters were attached
correctly to the appliance before you
start cleaning. Filters must be
undamaged and dry. Uncompatibility
can damage your vacuum cleaner.
ATTENTION!
If you use the cylinder vacuum cleaner
without attached nozzle, there is a greater
risk of accidently vacuuming up objects.