Operation
37
5.
:represents OSCILLATION. There is no
oscillation setting by default. Press this key
and it automatically swings with the angle of
30° - 90° - 180° - 360°, and the LED light changes
accordingly.
6. Others.
•
The oscillation is controlled by stepping motor and
swing with 15º to the left and right respectively,
which apply to any angles except for 360º. It
would swing circularly in a clockwise when at 360º
•
When in standby mode, wind speed and
oscillation will all be saved. (Timing & sleeping
mode will not be saved)
Remote control
•
Remote Controller Usage:
1. Open up the battery cover on the back of
remote controller and then installing button
batteries with 3V CR2032.
2. Align to infrared receiver module when using
remote controller.
3. Replace the battery after power off. Please
pull out battery cover according to indication from
below. Attention the positive and negative pole of
the button batteries when replacing;
Oscillation
