
MEGAMIX
GB
21
Cleaning and Maintenance
The removable parts, such as the glass jug, the lid and the feeder are dishwasher
safe. Wipe all parts thoroughly before storing.
Remove difficult spots after a brief soak and rub with a mild detergent and a soft brush.
Use a damp cloth for cleaning the motor part. Let it dry completely before you use it
again or put it away.
Remove the knife holder from the glass jug and clean it separately as follows;
put the glass jug upside down and loosen the locking ring underneath the jug.
Separate the knife part and the gasket from the locking ring.
The knife holder and the locking ring are dishwasher proof. The gasket should,
however, be cleaned with water and a mild detergent. Wipe all parts thoroughly after
cleaning. Assemble the mixer after cleaning by first putting the glass jug upside down.
Pull the gasket onto the knife holder and position the knife holder with the gasket
and locking ring in the opening at the bottom of the jug. Screw the locking ring
onto the jug until it is completely tight. Check that it is properly fastened. Put the
glass jug back on the motor part.
NEVER IMMERSE THE MOTOR PART IN ANY
KIND OF LIQUID!
IMPORTANT!
That the knife blades are extremely sharp.
NOTICE!
After mixing of ice cubes the glass jug should be
cleaned in lukewarm water, as the jug has been
cooled and hot water may cause tensions in the
glass that may make it burst.
IMPORTANT!
Содержание MEGAMIX
Страница 2: ......