20
JUICE MAX
GB
Assembling
1. Wash all detachable parts
2. Put the plug in the wall socket.
3. Place the juice collector into the appliance place the pulp container by tilting it
forwards slightly. Insert the top end of the pulp container first and then push the
bottom end ( fig.2) To empty the pulp container while you are juicing, switch off the
appliance and carefully remove the pulp container. (fig.10)
4. Put the filter in the juice collector hold the lid over the filter ( fig.3)
Make sure the filter is fitted securely onto the driving shaft(click’)
Always check the filter before use, If you find any cracks or damage, do not use the
appliance and contact the nearest service center or take the appliance to your
dealer.
5. Lift the safety clamp to locked position (you’ll hear the sound of ‘click’).
6. Place a glass or other Container at the end of the spout (fig.5).
Using the appliance
The appliance only functions when all parts are properly assembled and the lid is
properly locked in place with the safety clamp.
1. Wash the fruit or vegetables and cut them into pieces with the size which fits the
feeding tube(fig.
6
).
Make sure the juice cup is placed under the spout.
2. Switch the control knob to operate the appliance (fig.
7
)
Turn the control knob to setting 1(low speed)or 2(normal speed) to switch on the
appliance (fig.
7
)
Speed 1 is especially suitable for soft fruits and vegetables such as water melons,
grapes, tomatoes, cucumbers and raspberries.
Speed 2 is suitable for all kinds of fruit and vegetables.
3. Put the prepared pieces in the feeding tube and gently press them down towards the
rotating filter with the push tube(fig.
6
)
Do not use too much force to push the Push tube as this could affect the quality of
the juice and it could even cause the filter to come to a halt.
Never insert your fingers or any object into the feeding tube.
4. After inserting all ingredients and the juice flow has stopped, switch off the appliance
and wait until the filter has stopped rotating.
5. When you finish juicing, you can lift the juice mouth to prevent the remaining juice
from dripping on the table.
NOTE!
Reassemble the empty pulp container before you
continue juicing.