Fakir HERBA, Инструкция по эксплуатации

Страница: 10 / 16

10
manufacturer’s Ironing instructions
that are often shown by symbols
Similiar to the following.
HOW TO FILL WATER
1. Wait for appliance completely cooling
down.
2. Turn off the power switch and unplug
the appliance.
3. Turn the safety cap anticlockwise off
the fill opening.
4. Fill approx. 800ml water into the tank.
Use the enclosed funnel when filling
with water.
5. Firmly refit the safety cap.
NOTE:
The steam function may only
be used when there is enough water
in the water tank. Therefore, always
replenish the water before ironing to
avoid waiting periods caused by
refilling the reservoir while ironing.
FIRST TIME IRONING
1. Remove any protective films or sticker
from the soleplate and the cabinet, if
any.
2. Unwind and straighten the power cord
and supply cord.
3. Fill the boiler with tap water. (See How
to fill water)
4. Connect the appliance to a suitable
mains supply outlet.
5. Turn on the power switch.
6. Turn on the boiler switch.
7. Set the “steam level” to maximum level.
8. Turn the Temperature Dial on the iron
unit in clockwise direction to maximum
position. Pilot Light glows.
9. Steam ironing ready light glow on when
ready for steam ironing.
10.Pilot Light goes off when the required
temperature for the iron unit is reached.
11The appliance is ready to use.
12.Depress the Steam Button for 1 minute
to clean the steam generating system.
13.Begin first time ironing with an old
towel.
STEAM IRONING
1. Unwind and straighten the power cord
and supply cord.
2. Fill the boiler with tap water. (See How
to fill water)
3. Connect the appliance to a suitable
mains supply outlet.
4. Turn on the power switch.
5. Turn on the boiler switch.
6. Set your required “steam level” to
maximum level.
7. Turn the Temperature Dial on the iron
in clockwise direction, select dot-1,
dot-2 or dot-3 according to the
recommendation of garment label.
8. Steam ironing ready light glow on when
ready for steam ironing.
9. Pilot Light goes off when the required
temperature for the iron unit is reached.
10.The appliance is ready for use.
11.Press the Steam Button for steam
ironing.
12.Turn the Temperature Dial on the iron
unit in anti-clockwise direction to “Min”