24
OPERATION
GB
4. Set the nozzle switch to "carpet" or "hard floor"
according to the floor (Fig. 11) to be cleaned:
- Hard floor (Fig. 11/A)
Laminate, tiles, PVC, etc.
- Carpet (Fig. 11/B)
Short- and deep-pile carpets, rugs, etc.
5. When working with the vacuum cleaner, pull if after you
like a sleigh. Follow the respective recommendations of
the flooring manufacturers.
1. To set the desired power setting, press the + button or
the - button several times until the desired setting lights
up on the suction power display.
- + button (Fig. 13/2) increases suction power
- - button (Fig. 13/3) reduces suction power
You can adjust the suction power to suit the type of floor
being cleaned. Use the symbols on the suction power
display as a guideline (Fig. 13/1):
Curtains, textiles (lowest setting)
Upholstery, cushions
High-class carpets, rugs and runners
slightly soiled carpets and hard floors
Heavily soiled carpets and hard floors with coarse dirt
(highest setting)
3.2 Setting the suction
power
With the bypass vent (Fig. 12/1) you can quickly
reduce the suction power if less power is needed,
or to release objects accidentally sucked in.
NOTICE!
(Fig.11)
(Fig.12)
(Fig.13)
