MAINTENANCE
Always switch OFF the power and
disconnect the power plug of the
battery charger from the power outlet
before starting maintenance.
Single Unit, Main Body, Battery
Charger
• Wipe off any dirt from the product using
a dry and soft rag.
• In case of stubborn dirt, clean using a
soft damp rag soaked in a water
solution diluted with a little neutral
detergent and then wipe with a dry rag.
• Do not use solvents like thinner,
benzene, and spray type cleaners.
Dust Retainer (Nozzle)
• Remove any collected dust inside the
dust retainer first and wash. Wipe with
a dry reg, leave it to dry well in a shade
and attach it again to the main body of
single unit.
Filter, Filter Baffle Plate
• Do not wash the filter or the filter baffle
plate in the washing machine.
• Do not dry them using a hot air blower
such as a dryer or a hair dryer.
• In case of stubborn dirt or loss in suction
power, wash as instructed below:
a.
Remove the dust first.
b.
Wash with water.
c.
Leave to dry well in a shade.
Rotating Brush
Regular Maintenance
Slowly rotate the brush manually and
remove any foreign objects tangled
around the brush.
Maintenance when the rotating brush
cannot be manually rotated;
a. Unscrew the left hand side and then
lift and dislodge the brush cover.
b. Lift up the left side of the rotating brush
and then remove the belt pulley from
the belt.
c. Take out the rotating brush and the
remove the blockage.
d. Re-install the rotating brush again.
Finally, check if the brush cover is
securely fixed and the rotating brush
rotates properly.
a
b
c
Take out wastes
c
d
a
b
Take out wastes
14