ADDITIONAL INFORMATION
MODEL TYPES
some chargers offer
a dual rate of charge which is marked
clearly on their front panel. Use the
high rate setting for normal charging
and the low rate for slow or overnight
charging of automobile batteries.
AC POWER FAILURE
the battery
will not discharge back through the
charger if the AC power is turned off.
NEW DRY CHARGED BATTERIES
require a conditioning charge after
being filled with electrolyte. Follow
the battery manufacturer’s charging
instructions.
I
ncorrect use or tampering with this
product may result in a risk of electrical
shock or a fire hazard. Which could result
in death, a serious injury, shock or burns.
DO NOT
attempt to operate a battery
charger if it appears to be damaged in
any way.
DO NOT
use the charger in damp or wet
conditions.
DO NOT
expose the charger to rain,
snow, water, gas, oil, etc.
DO NOT
modify any part of this charger
or its circuitry.
DO NOT
use on 110 volt power supplies
this charger is for use on a nominal 240
volt circuit.
DO NOT
use this charger to supply low-
voltage power for applications other than
battery charging. It is not intended or
designed for such use.
DO NOT
use this charger with a fuse
of the incorrect rating the BS approved
plug should be fitted with 3amp fuse for
charging applications.
ALWAYS
disconnect the charger from the
wall socket by removing the plug, do not
pull on the power cord.
ALWAYS
inspect the AC and DC cables
for any breaks or splits in their insulation
at regular intervals.
ELECTRICAL SAFETY
MAINTENANCE
■
ALWAYS
unplug the charger from
the mains outlet before attempting any
maintenance or cleaning.
■
ALWAYS
take this charger to a
qualified service engineer when a
repair or service is required. Incorrect
carried out repairs may result in a risk
of electric shock or fire.
5
