ALWAYS
disconnect the charger before
starting the engine, this charger does not
have an engine starting feature.
ALWAYS
use insulated/non-conducting
tools to remove cell caps or when
disconnecting a battery.
ALWAYS
keep flames, matches, lighters,
cigarettes or other ignition sources away
from the battery.
ALWAYS
make sure the chargers
crocodile clips make good contact with
the battery terminals, twist or rock them
back and forth several times to ensure a
good contact is achieved.
ALWAYS
ensure the second crocodile
clip connection is made away from the
battery. See Operating Instructions
(Page 6 Step 3).
ALWAYS
plug the charger into an
electrical outlet after all connections have
been made. See Operating Instructions
(Page 6 Step 1).
ALWAYS
remove the ground terminal
(negative terminal connected to the cars
frame) from the battery first. If the battery
is to be removed from the vehicle for
charging.
ALWAYS
exercise caution when using
metal tools on or near a battery. A metal
tool touching both battery terminals
simultaneously or a positive terminal and
a metal car part will create a short circuit
that will spark, possibly causing a battery
explosion. Do not drop a metal tool on to
a battery.
ALWAYS
add distilled water to each cell
until the battery acid covers the plates
before connecting the charger this helps
to purge excess gas from the battery.
ALWAYS
ensure the area is well
ventilated before and during the charging
process. Never charge in an enclosed or
restricted area.
ALWAYS
locate the charger as far away
from the battery as the DC cables permit.
ALWAYS
follow other manufacturer’s
recommendations in conjunction with your
chargers instructions.
ALWAYS
read all instructions and
caution markings on: (1) charger, (2)
battery, (3) any related product being
used in the charging process. Follow the
recommended rate of charge and any
other instructions provided.
4
Power supply voltage: AC 220~240V
50Hz
Output voltage:
DC 6V/12V
Battery capacity:
9Ah - 112Ah
Maximum output:
8Amp / 140W
Power cable length:
1.6metres
Battery leads length: 1.4 metres
Charging current:
High rate: 5.6 Adc / 8 Amps RMS
Low rate: 2.8 Adc / 4 Amps RMS
Specifications
A
START
STOP
PLEASE NOTE:
This charger is NOT
suitable for AGM or EFB
batteries mainly used with
start/stop technology.
