Operating Instructions
Filling the spray bottle
(Fig.11)
Unscrew the pump handle (1) anti-clockwise
to loosen and remove the pump handle
assembly from the fill inlet (8).
Fill the spray bottle with your chosen liquid
to the desired level through the fill inlet (8).
(Fig.12)
Note:
whilst the fill inlet incorporates a
flanged rim to help avoid spillages, the
additional use of a large funnel (H) may be
advisable, especially when using potentially
hazardous liquids.
Replace the pump handle assembly and
screw clockwise to close.
(Fig.13)
Pressurisation
(Fig.14)
Working spraying pressure is acheived by
pumping the handle (1) approximately 30
times.
Note:
Try to avoid overfill with either air or
liquid. Air will bleed from the safety pressure
valve if the pressure exceeds 2.5bar. (see the
following section for more information).
H
8
1
8
1
8
x30
1
Fig.11
Fig.12
Fig.14
Fig.13
