7
EMC EMISSION AND IMMUNITY LEVELS
ESD immunity
EC 61000-4-2
4kV contact.
8kV air discharge
R F immunity
EC 61000-4-6
140dBuV over 0.15-80MHz
R F immunity
EC 61000-4-3
10V/m over 80 -1000MHz
Fast Transient immunity
EC 61000-4-4
2kV/5kHz
Surge immunity
EC 61000-4-5
2kV line to ground
1kV line to line
Conducted RF emissions
EN 55011
Class A
Radiated RF emissions
EN 55011
Class A
Rated Impulse withstand Voltage (Uimp)
2.5kV
Rated Insulation Voltage (Ui)
500V
Pollution Degree
2
Rated Short Circuit Current (Iq)*
10kA
Short Circuit Co-ordination*
Type 2
Ambient Temperature
0°C to 40°C.
Above 40°C de-rate linearly by 2% of unit FLC per °C to a derate of 40% at 60°C
Transport and Storage
-25°C to +60°C
Altitude
1000m. Above 1000m de-rate linearly by 1% of unit FLC per 100m to a
max. altitude of 2000m.
Humidity
max. 85% non-condensing, not exceeding 50% at 40°C
IP Rating
IP20 or IP00
Design Standards
IEC 60947-4-2;
EN60947-4-2
“AC Semiconductor Motor
Controllers and Starters”
* When protected by
recommended
semiconductor fuse.
Attention!
Within the scope of the EU Directives, the SDF soft starters and their accessories may be
commissioned only provided it is established that the machine fulfils the protective
requirements of Machine Directive 89/392/EWG.
Achtung!
Im Geltungsbereich der EG-Richtlinien dürfen die Softstarter der Reihe DS4 und deren
Zubehör nur dann in Betrieb genommen werden, wenn festgestellt wird, dass die Maschine
die Schutzanforderungen der Maschinenrichtlinie 89/392/EWG erfüllt.
¡Atención!
En el campo de aplicación de la normativa CE, los arrancadores suaves de la serie SDF
y sus correspondientes accesorios sólo deberán ponerse en marcha cuando se asegure
que la máquina cumple con las exigencias de seguridad de la normativa de máquinas 89/
392/CE.
Attention !
En application des directives européennes, les démarreurs progressifs de la gamme SDF
et leurs accessoires ne doivent être mis en service que s’il a été vérifié que la machine
répond bien aux exigences de la directive machines 89/392/EWG.
Attenzione!
Nel campo di validità delle direttive CEE i softstarter della serie SDF e i loro accessori
possono essere messi in esercizio solamente se è verificato che la macchina soddisfai
requisiti di sicurezza delle direttive macchine 89/392/CEE.
