Customer Help Line:
+27 087 740 2101
This design and instruction booklet is subject to copyright.
www.Fairprice.co.za
ASSEMBLY
1
IDENTIFY THE BOTTOM (PART 2) AND STRETCHER (PART 9) , WITH A SCREW DRIVER AND
8x45mm SCREW FASTEN THE BOTTOM ON TO THE STRETCHER "PLEASE DO THIS STEP FOR
THE TOP (PART 1) ALSO SO ITS READY FOR STEP 5".
2
WITH A COMPLETE BASE UNIT (PART 2,9) IDENTIFY BOTH SIDES (PART 3) AND FASTEN THE
SIDES ON TO THE BASE WITH A 50mm CONFIRMAT SCREW AND ALLEN KEY"PLEASE
ASSEMBLY THE UNIT ON A FLAT CLEAN SURFACE".
3
IDENTIFY THE DIVISION 2 (PART 4), SHELF 1 (PART 6a) WHICH MUST HAVE 2 DRILLED HOLES ON
THE MIDDLE, INSERT 8x30mm DOWELS AND WITH AN ALLEN KEY AND 50mm CONFIRMAT
FASTEN THE SHELF THEN DO THIS FOR THE OTHER TWO SHELVES (PART 6b) THEN INSERT
8x30mm DOWELS ON TO THE SHELF 1 (PART 6a) AND FASTEN THE DIVISION 2 (PART 5) ON TO
THE SHELF WITH 50mm CONFIRMAT SCREWS. "PLEASE ONCE THE UNIT IS COMPLETE INSERT
THE DRAWER SLIDES (g) ON THE HOLES PROVIDED ON THE TWO DIVISIONS (PART 4,5)
4
INSERT 8x30mm DOWELS WHICH WILL CORRECTLY POSITION UNIT 2 ON TO UNIT 1 AND
WITH A 50mm CONFIRMAT SCREW AND ALLEN KEY FASTEN THE 2 DIVISION (PART 5,6) ON
TO THE BOTTOM (PART 2) PRE-DRILLED HOLES WILL GUIDE THE CONFIRMAT "YOU WILL
NEED ASSISTANCE TO ASSEMBLY THESE TWO UNITS".
5
3/4
IDENTIFY THE SUB ASSEMBLED TOP (PART 1,9), BASE (PART 2,9) AND WITH A 8x20mm
SCREW FASTEN THE KICK PLATES (PART 8) ON TO THE STRETCHER (PART 9) THEN INSERT
8X30mm DOWELS ON THE TOP (PART 1,9), WITH AN ALLEN KEY AND 50mm CONFIRMAT
SCREW FASTEN THE TOP TO THE SIDES (PART 3) AND DIVISION (PART 4,5)" PLEASE ALSO
INSERT THE HANGING RAIL BRACKETS ON THE HOLES ON THE SIDE (PART 3) AND DIVISION
(PART 4)".
6
WITH ASSISTANCE FLIP THE WHOLE UNIT AND ON THE BACK, WITH A HAMMER AND
PANEL PIN NAILS FIX THE 3mm BACK (PART 13 ) ON TO THE UNIT "PLEASE MAKE SURE
THE FLOOR IS CLEAN AND THERE IS NO OBJECT THAT CAN DAMAGE THE UNIT.
2
9
3
9
13
1
8
4
6a
6b
UNIT 1
UNIT 2
3
4
