Fagron FagronLab RVC1 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 24

Fagron FagronLab RVC1 Скачать руководство пользователя страница 14

FagronLab™ RVC1

FagronLab™ RVC1 – User Manual | 14

Water tank and mop

Cleaning side brushes

Usage of water tank and the fiber mopping cloth:

Clean the side brush when it gets dirty and replace it if it's damaged. Max life span for side brush is 12 months.

•

Attach the fiber mopping cloth to the bottom of water tank.

•

Fill up the water tank with water. Open the rubber plug, fill it with water, and

your cleaning agent. Close the rubber plug tightly to avoid leakage.

•

Attach the water tank to the robot. Turnover the robot, attach the water tank to

the robot, the bolts must enters tightly into the slots available underneath the
robot. Please note that the UV function can not be used simultaneously with
mopping accessory.

MOP

Water tank

Rubber plug

8. Product maintenance

Note:

•

Before replacing side brushes, check and make sure the 'L'/'R' mark on side brush match with the
'L'/'R' mark on the bottom base of the robot.

«
...
12
13
14
15
16
...
»

Содержание FagronLab RVC1

























Отзывы:

Нет отзывов