Fagor WC-118TZ, Инструкция по эксплуатации, Страница: 9 / 36

Model WC-28DZ and WC-46DZ
1. Remove the front ventilation grille
A
○
2
E A
and the
adjustable ventilation grille
A
○
1
E A
by unscrewing
the screws
A
○
3
E A
&
A
○
4
E A
. (Fig. 1).
NOTE: For model WC-28DZ, the step of
removing the ventilation grille is not needed.
2. Remove the bottom hinge plate
A
○
5
E A
by
unscrewing the four lock screws
A
○
6
E A
. Make sure
to hold the glass door firmly after removing the
screws. (Fig. 2).
3. Gently pull down to remove the glass door from
the right top hinge and place it on a padded
surface to avoid the risk of damage. Then
remove the right top hinge
A
○
7
E A
. (Fig. 3 & 4).
4. Unscrew and transfer the hinge pin of the
bottom hinge plate
A
○
5
E A
to the opposite side.
5. Pop out the cover caps on the left side of
cabinet and use them to cover the screw holes
on the right hand side.
6. Screw the alternative left top hinge
A
○
9
E A
, included
in the fittings, on the left hand side of cabinet.
(Fig. 4).
7. Rotate the door 180° and then relocate the door
to the designated position. Then screw the
bottom hinge assembly on the left designated
position and tighten it after the door is leveled.
(Fig. 2).
8. Reassembly the ventilation grilles.
NOTE: For model WC-28DZ, the step of
reassembling the ventilation grille is not
needed.
Model WC-118TZ
1 2
3
4 5
9
1 4
1. Remove the bottom hinge
A
○
1
E A
by unscrewing
the four lock screws
A
○
2
E A
. Be careful to hold the
glass door firmly after removing the screws. (Fig.
1).
2. Gently pull down to remove the glass door from
the right top hinge and place it on a padded
surface to avoid the risk of damage. Then
remove the right top hinge
A
○
8
E A
.
3. Pop out the cover caps on the left side of
cabinet and use them to cover the screw holes
on the right hand side.
4. Screw the alternative left top hinge
A
○
7
E A
, included
in the fittings, on the left hand side of cabinet.
(Fig. 3).
5. Unscrew and transfer door supporter
A
○
9
E A
to the
opposite side. At the same time remove the
stopper pin
A
○
6
E A
to the opposite designated
position of the bottom hinge. (Fig. 5&3).
6. Unscrew and transfer the door adapter
A
○
4
E A
the
opposite designated position. (Fig. 2).
7. Relocate the glass door to the designated
position. Then screw the bottom hinge on the
left designated position and tighten it. (Fig. 5).
8. Recheck and adjust the door alignment by
loosening the screws
A
○
5
E A
and moving the door
adapter
A
○
4
E A
. Tighten the screws
A
○
5
E A
after the
door is levelled. (Fig. 5).
9