Fagor VISUAL VE 101, Инструкция по эксплуатации

Страница: 32 / 111

ENGLISH
VISUAL INSTRUCTION MANUAL
32
CONFIGURATION SELECTOR BUTTON
The configuration selector button is used to modify certain predefined parameters.
•
Language: Select required language. Spanish by default.
•
Programme date and time: Programme actual date and time.
•
Programme Delta: This allows the value to be allocated to the Delta function to
be selected. This value is used whenever working in Delta mode. The Delta
range is from 20 to 80, with a default value of 50.
•
Programme temperature scale: This allows selection of the temperature scale to
be displayed, ºC (default) or ºF.
•
Thermal stop: This option allows the timer operation to be programmed, that is,
when the countdown of a timed operation begins. If
Thermal stop
is activated, the
oven does not start the countdown until the appliance reaches the programmed
temperature. On the other hand, if the
Thermal stop
is
Not Activated
, the default
option, the countdown starts as soon as the START/STOP button is pressed.
DELAYED PROGRAMMING
Access to the delayed programming option allows the oven to be switched on at a set
time with the established parameters.
First the oven should be programmed with the required parameters, then press the
delayed programming button (16) and select the start time and date. After confirmation,
the upper text displays that the oven has been programmed, showing the start time and
date.
To cancel the programming:
•
Press the same button again
•
If the oven is switched off or started using the START/STOP button, the
programming will also be cancelled.
To access this option the oven should be switched on but in STOP mode.