●
Press the “
OK
” key to begin the recording .
●
While the programme is being recorded, only
programmes from the same multiplex can be viewed.
●
Press the “
STOP
” key on the remote control to stop
the recording before the programmed time is completed.
Time-Shift Function
●
Use this function to pause a programme and continue
watching it later at the same point where you left off.
●
Press the “
PAUSE
” key to activate the function.
The picture freezes, the programme starts to be recorded
on the USB device connected to the receiver and a timer
appears showing the recording time.
●
Press the “
PAUSE
” key again to continue watching the
programme at the point where you left off.
●
Use the and keys to move forward and backwards
in the recording.
●
Press the “
STOP
” key to deactivate the Time-Shift
function and resume watching the programme in real
time.
●
The recording is not saved in the memory.
●
The maximum recording time depends on the space
available on the USB device.
●
While the Time-Shift function is active, it will be impossible
to view any other programme and teletext and subtitles
will be unavailable.
42
UK
5.2.1.2 Radio
●
The functions for the Radio submenu are the same
as those described for the TV submenu.
(See section 5.2.1.1).
5.2.1.3 Recorder
●
View the list of recordings found on the USB device
connected to the receiver.
●
Select a recording using the PR- and PR+ keys.
Press “
OK
” to play the recording on the preview screen.
Press the yellow key on the remote control to change
to full screen view.
Recording a programme
●
In normal operating mode, press the “
RECORD
” key
on the remote control. A message will be displayed on
screen in which it is possible to change the programmed
recording time. The maximum recording time depends
on the space available on the USB device.
