- Lower door alignment: Align the bottom of the lower
door with the cabinet by adjusting the height of the legs (1.1.5,
1.1.6). Loosen the studs. Align the doors laterally (1) and
vertically (2) with the Allen key supplied (1.2.16).
- Upper door alignment: Loosen the screws. Align the door
laterally (1) and vertically (2) with the Allen key supplied, leaving
a 4 mm (0.1") clearance between the doors.
Securing and final adjustment the cabinet doors to the appliance
•
Once you have adjusted and aligned the cabinet doors,
tighten the screws in the main joint set and screw in the bottom
part of the doors using the lower clamping frame (1.2.17).
•
Fit the closed door detector plug in the upper door
(1.2.18).
1.3 Final
installation.
Lateral attachment of the appliance: when the appliance is in its
final position:
•
Screw the hinges into the sides of the cabinet (1.3.1).
•
Screw in the opposite side of the hinges (1.3.2, 1.3.3).
Be careful not to scratch the appliance when using the
screwdriver.
Fixing the back of the appliance: once the refrigerator is in the
correct position:
•
Make sure that the refrigerator is attached to the side
panels using the frames (1.3.4).
