7. STEAM IRONING
1. Fill the iron as described in Section 3 “Filling the
water reservoir” and plug in the iron.
Press the
“increase temperature” regulator (6) to turn on
the unit.
2. The
LCD
screen
(4)
will show all the symbols at
once and you will hear a beep. Then the screen will
show Point 1 and the iron will start to heat up.
3. Select the right temperature. See Section 4
“Setting the temperature”.
4. Select the steam option by pressing the steam
button
(5)
. The iron will give a whistle and
the symbol will start flashing. Wait until the
symbol appears on the screen indicating that the
steam is ready
5. When you want to disconnect the steam, again
press the steam button (5). The symbol will
stop flashing.
6. If you wish to disconnect the iron, hold the
“increase temperature” setting
(6)
down for 2
seconds
(Fig. D)
. The screen will go off with a
beep.
7. Unplug the iron and let it cool down before storing
it away.
8. SPRAY
To use this function there must be water in
the reservoir. If you wish to obtain a spray
of water to dampen dry or difficult-to-iron
fabrics, press the spray button
(2)
. The
spray function is also useful to dampen
creases created by accident while ironing.
The spray of water will come through the
spray nozzle
(9) (Fig. E)
.
N.B.:
It may be necessary to press the
spray button several times to activate this
function.
9. EXTRA STEAM
Switch the iron on, as indicated in Section 6
“Steam ironing”. When the iron has reached
the temperature selected, press the extra
steam button
(3)
while ironing and the
steam will come through the holes in the
sole
(Fig. F)
onto the fabric, smoothing out
the most difficult creases. Wait for at least
5 seconds between each use of the extra
steam button so as to allow the iron to heat
up again and thereby obtain the maximum
amount of extra steam.
Upright steam:
The extra steam function
also works when the iron is in an upright
position. To use this function, hold the iron
upright around 15-30 cm away from the item,
press the extra steam button
(3)
, and the
steam will come out of the holes in the sole
(Fig. G)
.
CAUTION:
Do not direct the iron towards
people as the temperature of the steam is
very high.
10. AUTOMATIC SHUT-OFF
The shut-off function will work automatically
when the iron is left unattended whilst
connected to the mains.
•
Automatic shut-off while the iron is
horizontal position or lying on its side:
If the iron remains immobile for 30
seconds in an ironing position (horizontal
or on its side), the iron will disconnect
automatically. The " " pause symbol on
the LCD screen and the light will go off. To
reconnect, simply move the iron.
• Automatic shut-off in the upright
position:
If the iron remains immobile for 8 minutes
on its support base (upright), the iron will
disconnect automatically. “AUTOMATIC
SHUT-OFF” will appear on the LCD screen
and the light will go off. To reconnect,
simply move the iron. N.B: the iron will
take 60 seconds to reach its previous
temperature.
11. LANGUAGE SELECTION
Hold the “lower temperature” setting down
for 2 seconds
(7) (Fig. H)
. EN will appear
on the LCD screen
(4)
. Press the “lower
temperature” setting
(7)
again to change the
language. The language will change from EN
(English ) to DE (German), and from DE to
FR (French). To select the desired language,
press the “increase temperature” setting
(6)
and the language selected will be set..
N.B.:
The default language is English.
13
